Attach the Access Point to a Pole Using
KT-147407-02 Pole Part and the KT-150173-01 Extension Arm
Before you begin
The access point can be mounted on a pole using the KT-147407-02 pole part and the
KT-150173-01 extension arm.
The following hardware is required:
KT-147407-02 pole part
KT-150173-01 extension arm
Four M6 hex-head screws
Two M12 stainless-steel screws and nuts
Two 0.5 in. (12.7 mm) wide
stainless-steel cable clamps
Access point
About this task
To install the access point on a pole:
Procedure
Attach one end of the
KT-150173-01 extension arm to the access point using two M6 hex-head
screws.
Attach the KT-147407-02 pole
part to the other end of the KT-150173-01 bracket using two hex-head M12
stainless-steel screws, and two hex-head M12 stainless-steel nuts.