AP360i/e Features

The AP360i/e access points have the following features:
  • Radios:
    • Two 802.11ax radios (one 2×2 2.4GHz and 5GHz radio, and one 2×2 5GHz radio)
    • One IoT radio (2.4GHz)
  • Console port: RJ45
  • Two Ethernet ports:
    • 1×100/1000 Mbps auto-negotiation Ethernet port, RJ45
    • 1×10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
  • LEDs: Six. All LEDs will be on during reset
  • One rest button
  • Power: PoE 802.3af (for more information on power used at 802.3af and 802.3at modes, see AP360i/e Power Tables)
  • Antennas:
    • Four WiFi internal antennas on AP360i and four WiFi external antennas on AP360e
    • One BLE internal antenna on AP360i and one BLE external antenna port on AP360e
  • Temperature: -40°C to +60°C (-40°F to +140°F) @ 6000 ft.
  • Enclosure: Plastic
Click to expand in new window
AP360i access point front view
Image of the AP360i access point with numerical callouts indicating the console port and reset button cap, GE2 port, GE1-PoE port on the left side of the image, and vent on the bottom of the access point.
Callout Description
1 Console port and reset button cap
2 GE2
3 GE1-PoE
4 Vent
Click to expand in new window
AP360e access point front view
Image of the AP360e access point with numerical callouts indicating the console port and reset button cap, GE2 port, GE1-PoE port on the left side of the image, and vent on the bottom of the access point.
Callout Description
1 Console port and reset button cap
2 GE2
3 GE1-PoE
4 Vent
Note

Note

The BLE antenna on the AP360e access point comes with a dust cap. Do not remove the dust cap until you need to install the antenna.
9036628-02 Rev AA