ExtremeWireless™ AP360i/e Access Points
> Antenna Configuration for External Antenna Model Access Point
Published January 2024
Search this document
Print this page
Email this page
View PDF
Previous
Next
Preface
Text Conventions
Documentation and Training
Getting Help
Providing Feedback
AP360i/e Overview
New in this Guide
AP360i/e Features
Power Source
AP360i/e Power Tables
LED Indicators
Access Point Purchase Order Information
Install the Access Point
AP360i/e Box Contents
Access Point Mounting Options and Bracket Information
Position the Access Point before Installation
Ground Connection
Install the Access Point on a Wall or to a Flat Surface
Install the Access Point to a Flat Surface Using KT-147407-02 Flat Part and 1-Axis Tilt Part
Install the Access Point to a Flat Surface Using the KT-147407-02 Flat Part, 1-axis Tilt Part, and the KT- 150173-01 Extension Arm
Install the Access Point On a Flat Surface Using the KT-150173-01 Extension Arm
Install the Access Point on a Wall With the MBO-ART03 Bracket
Install the Access Point on a Flat Surface Using the MBO-ART02 Articulating Mounting Bracket
Install the Access Point on a Hard Vehicle Surface Using the WS-MBV-VMM Vehicle Bracket (#32216)
Install the Access Point on a Pole
Attach the Access Point to a Pole Using All Three KT-147407-02 Bracket Parts
Attach the Access Point to a Pole Using the KT-147407-02 Pole Part
Attach the Access Point to a Pole Using KT-147407-02 Pole Part and the KT-150173-01 Extension Arm
Attach the Access Point to a Pole Using the KT-147407-02 Bracket Parts and the KT-150173-01 Extension Arm
Install the Access Point on a Pole with the MBO-ART03 and KT-147407-02 Brackets
Attach the Access Point to a Pole Using WS-MBO-POLE01 Bracket and MBO-ART02 Articulating Mounting Bracket
Install the Access Point on a Unistrut Structure Using the MBO-ART03 Bracket
Install the AIO-DQ15021-N Antenna
Weatherproof the Antenna Connections
Drip Loop for Anenna Cables
Antenna Configuration for External Antenna Model Access Point
GE and Console Connections
Console Cap Assembly
Cable Gland Adapter Assembly
Access Points Specifications
AIO-DQ15021-N Antenna
AIO-DQ15021-N Technical Specifications
AIO-DQ15021-N Radiation Patterns
Regulatory and Compliance Information
Professional Installation Instruction
Safety Guidelines
Federal Communications Commission (FCC) Notice
Industry Canada Notice
Detachable Antenna Usage
Australia Notice
Brazil Agência Nacional De Telecomunicações (Anatel) Statement
Hazardous Substances
Supplement to Product Instructions
NCC Statement
CE Information
European Waste Electrical and Electronic Equipment (WEEE) Notice
Declaration of Conformity in Languages of the European Community
Antenna Configuration for External Antenna Model Access Point
AP360e
external antenna connector ports
Antenna socket radio mapping information
Radio 1 (R1) – antennas 3 and 4
Radio 2 (R2) – antennas 1 and 2
Table 1.
AP360e
antenna configuration
Software mode
Radio 1
Radio 2
Mode 1
2.4 GHz
5 GHz
Mode 2
2.4/5 GHz
5 GHz
Mode 3
5 GHz–low
5 GHz–high
Mode1: Dual Band Dual Concurrent (DBDC)
Mode2: Radio 1 unlocked for sensor operation and radio 2 locked at 5 GHz full band
Mode 3: Dual 5 GHz, radio 1 locked at 5 GHz low band, and radio 2 locked at 5 GHz high band
Note
The BLE antenna port comes with a dust cap on it. Do not remove the dust cap until you are ready to install the antenna.
