Install the Access Point

About this task

The access point is installed on flat surfaces such as drywall or wood wall, solid flat ceiling, suspended or drop ceiling with T-bar, to beams, or to a junction or gang box. Optional adapters and brackets are available for mounting the access point to non-flat ceiling tiles and T-bars.

See purchase order information for details on access points and optional brackets part numbers.

Before installing the access point:

Procedure

  1. Verify the box contents.
  2. Visually inspect the access point, the bracket, and any other optional accessories you have ordered for physical damage.
    If there is any damage, contact Extreme Networks Support.
  3. Read and review the safety guidelines.
9036459-04 RevAA