Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

Attaching the Front Bezel

The appliance comes with an optional front panel bezel, which can be attached to the front of the chassis by snapping it on the rack handles. A key lock allows you to lock the bezel in place to restrict access to the controls. You can monitor the system status indicators with the bezel in place.

Before installing the bezel, you must install the rack handles as shown in Installing the Rack Handles.

  1. Lock the right end of the front bezel to the rack handle (see letter “A” below).
  2. Rotate the front bezel clockwise until the left end clicks into place (see letter “B” below).
    Click to expand in new window
    Attaching the Optional Bezel
    _Graphics/c5215_optional_bezel.png
  3. Lock the bezel if needed.
Published November 2017prev | next

Email this topicEmail this topic

Print this pagePrint this page