efa tenant service bgp peer-group create

Parameters

--name peer-group-name

Specifies the name of the BGP peer group instance.

--tenant tenant-name

Specifies the name of the tenant.

--pg-asn string

Specifies the ASN of the BGP peer group with a string in the following format: device-ip:peer-group-name,remote-asn.

--pg-bfd string

Specifies the BFD properties of the BGP peer group with a string in the following format: device-ip: peer-group-name,bfd-enable(true/false),interval,bfd-min-rx,bfd-multiplier.

--pg-bfd-enable string

Turns on BGP peer group with a string in the following format: device-ip,peer-group-name:md5-password.

--pg-name string

Specifies the BGP peer group name with a string in the following format: device-ip:peer-group-name.

--pg-remove-private-as stringArray

Turns the remove-private-as setting on or off per BGP peer group, created for external connectivity, in the following format: device-ip,pg-name:true|false. For example: 10.20.246.16,pg1:true.

By default, the setting is off.

--pg-next-hop-self string

Specifies the next-hop-self for the BGP peer group with a string in the following format: device-ip:peer-group-name,next-hop-self(true/false/always).

--pg-update-source-ip string

Updates the source IP address of the BGP peer group with a string in the following format: device-ip:peer-group-name,update-source-ip.

--pg-md5-password string

Indicates the MD5 password.

Important

BGP MD5 authentication for tenant dynamic peers is not supported.

--pg-md5-password-prompt-enable { true | false }

Turns on secure input for the MD5 password. The default is false.

Important

BGP MD5 authentication for tenant dynamic peers is not supported.

--description string

Describes the BGP peer group.

--pg-ipv4-uc-nbr-prefix-list string

Identifies the IPv4 unicast neighbor with a string in the following format: device-ip,pgname:prefix-list-name,direction(in | out).

--pg-ipv4-uc-nbr-route-map string

Identifies the IPv4 unicast neighbor with a string in the following format: device-ip,pgname:route-map-name,direction(in | out).

--pg-ipv4-uc-nbr-send-community string

Identifies the IPv4 send-community in the following format: device-ip,pgname:send-community (all | both | extended | large | standard | large-and-standard | large-and-extended).

--pg-ipv6-uc-nbr-prefix-list string

Identifies the IPv6 unicast neighbor with a string in the following format: device-ip,pgname:prefix-list-name,direction(in | out).

--pg-ipv6-uc-nbr-route-map string

Identifies the IPv6 unicast neighbor with a string in the following format: device-ip,pgname:route-map-name,direction(in | out).

--pg-ipv6-uc-nbr-send-community string

Identifies the IPv6 send-community in the following format: device-ip,pgname:send-community (all | both | extended | large | standard | large-and-standard | large-and-extended).

--pg-ipv4-uc-nbr-add-path-capability string

Identifies the BGP peer-group add-path capability in the format device-ip,peer-group-name:add-path-capability. Valid values are (send / receive / both).

--pg-ipv4-uc-nbr-add-path-advertise-all string

Identifies the BGP peer-group add-path advertise all in the format device-ip,peer-group-name:add-path-advertise-all(true/false).

--pg-ipv4-uc-nbr-add-path-advertise-group-best string

Identifies the BGP peer-group add-path advertise group best in the format device-ip,peer-group-name:add-path-advertise-group-best(true/false).

--pg-ipv4-uc-nbr-add-path-advertise-best string

Identifies the BGP peer-group add-path advertise best in the format device-ip,peer-group-name:add-path-advertise-best. Valid values are 2-16.

--pg-ipv6-uc-nbr-add-path-capability string

Identifies the BGP peer-group add-path capability in the format device-ip,peer-group-name:add-path-capability. Valid values are (send / receive / both).

--pg-ipv6-uc-nbr-add-path-advertise-all string

Identifies the BGP peer-group add-path advertise best in the format device-ip,peer-group-name:add-path-advertise-best. Valid values are 2-16.

--pg-ipv6-uc-nbr-add-path-advertise-group-best string

Identifies the BGP peer-group add-path advertise group best in the format device-ip,peer-group-name:add-path-advertise-group-best(true/false).

--pg-ipv6-uc-nbr-add-path-advertise-best string

Identifies the BGP peer-group add-path advertise best in the format device-ip,peer-group-name:add-path-advertise-best. Valid values are 2-16.

--pg-ipv6-uc-nbr-activate stringArray

BGP peer-group Activate in the format device-ip,peer-group-name:activate(true/false).