efa inventory device interface
set-fec
Configures forwarding error correction
(FEC) on the SLX interface.
Syntax
efa inventory device
interface set-fec
[--ip
device-ip | --if-type eth | --if-name
if-list | --mode
{ fs-fec | rs-fec | auto |
disabled
}]
Parameters
- --ip
device-ip
- Specifies a comma-separated
range of device IP addresses. For example:
10.1.1.13,10.1.1.50,10.1.1.101.
- --if-type
eth
- Specifies that the interface
type is
eth (Ethernet), which is the default setting.
- --if-name
if-list
- Specifies a comma-separated
list of interface names. For example: 0/50-52,0/45,0/5:4,0/5:1-2.
- --mode
{ fs-fec | rs-fec |
auto | disabled }
- Specifies the FEC mode for
the ports.
Usage Guidelines
The configuration you set is persisted in the XCO database.
The default value of FEC configured by SLX is auto, that is auto-negotiation.
DRC and idempotency are supported.
Examples
efa inventory device interface set-fec –-ip 10.20.246.10
--if-type ethernet –-if-name
0/20 –mode rs-fec
