efa inventory device snmp community
create
Creates an SNMP community and SNMP
group.
Syntax
efa inventory device snmp
community create
[--ip
device-ip | --name
community | --group
group | --enable-read-access |
--enable-write-access | --enable-notify-access
|--viewview-name
]
Parameters
- --ip
device-ip
- Specifies a comma-separated
range of device IP addresses. Example: 10.1.1.13,10.1.1.50,10.1.1.101.
- --name
community
- Specifies an SNMP community
name.
- --group
group
- Specifies an SNMP group
name.
- --enable-read-access
- Sets read access for the
view.
- --enable-write-access
- Sets write access for the
view.
- --enable-notify-access
- Sets notify access for the
view.
- --viewview-name
- Optionally specify a SNMP view name. Default view efav3View used when not specified.
Usage Guidelines
The
command creates the SNMP community along with the SNMP group. This command is valid
for SNMP v2c version only.
XCO internally creates the v2
group and manages the community to group mapping. The group is created on the first
community that is associated with the group.
Examples
efa inventory device snmp community create --ip 10.139.44.153 --name community1
--group group1 --enable-read-access --view view1
