configure snmpv3 add filter-profile

configure snmpv3 add filter-profile [[hex hex_profile_name] | profile_name] param [[hex hex_param_name]] | param_name] {volatile}

Description

Associates a filter profile with a parameter name.

Syntax Description

hex_profile_name Specifies the filter profile name. The value is to be supplied as a colon separated string of hex octets.
profile_name Specifies the filter profile name in ASCII format.
hex_param_name Specifies a parameter name to associate with the filter profile. The value to follow is to be supplies as a colon separated string of hex octets.
param_name Specifies a parameter name to associate with the filter profile in ASCII format.
volatile Specifies volatile storage.

Default

The default storage type is non-volatile.

Usage Guidelines

Use this command to add an entry to the snmpNotifyFilterProfileTable. This table associates a filter profile with a parameter name. The parameter name is associated with target addresses, and the filter profile is associated with a series of filters, so, in effect, you are associating a series of filters with a target address.

Example

The following command associates the filter profile prof1 with the parameter name P1:

configure snmpv3 add filter-profile prof1 param P1

History

This command was first available in ExtremeXOS 10.1.

The hex_profile_name and hex_param_name parameters were added in ExtremeXOS 11.0.

Platform Availability

This command is available on all ExtremeSwitching Universal switches.