configure flowmon collector

configure flowmon collector collector_name

Description

Configures a created collector where Flow Monitor sends information.

Syntax Description

collector Specifies to send flow information to a collector.
collector_name Specifies the name of the created collector. Range is 32 characters.

Default

N/A.

Usage Guidelines

You must configuresrc-ipv4-address, which is a dotted decimal representation of the local address. If not configured, the collector cannot be activated.

You must configure dst-ipv4-address, which is a dotted decimal representation of the IPv4 address of a collector. If not configured, the collector cannot be activated.

Optional configuration parameters include the following:

Example

The following command configures a created collector with no additional parameters:

# configure flowmon collector ctest dst-ipv4-address 21.1.1.100  src-ipv4-address 21.1.1.1

History

This command was first available in ExtremeXOS 32.2.

Platform Availability

This command is available on ExtremeSwitching 5420, 5520, and 5720 series switches.