show flowmon group statistics

show flowmon group group_name statistics no-refresh wide

Description

Displays Flow Monitor group statistics information.

Syntax Description

group Specifies the Flow Monitor group.
group_name Specifies the assigned name of the Flow Monitor group. Range is 32 characters.
statistics Specifies to show Flow Monitor information for all groups.
no-refresh Specifies to show only one sample of the statistics and then exit the statistics display.
wide Specifies to show a wider version of the display.

Default

N/A.

Usage Guidelines

When group_name is entered, only the statistics for that group are shown. When not entered, all groups are shown using the Page Up and Page Down options.

Each group name is displayed along with the number of active flows, the number of flows that have aged out, the number of flows that were not learned because the group flow limit was exceeded, the number of flows learned on the group, and the number of flows that were not learned because the flow table was full.

When no-refresh is provided, the specified group or groups are displayed one time with their current values.

If no-refresh is not entered, the display is updated with refreshed values every five seconds. This display operates as a standard updatable Switch Engine statistics display, providing Page Up, Page Down, Exit, and Clear options.

When no-refresh is entered, the specified group or groups are displayed one time with their current values.

When wide is entered, a wider version of the display is shown. When wide is not entered, the counters are limited to a display width that fits into 80 display columns. When wide is provided, the full 64-bit counter value can be displayed (about 21 columns per integer value).

Example

The following command shows statistics for a group with the name 'g1' with no-refresh specified:

# show flowmon gr g1 statistics  no-refresh 
Group Name               Active   Aged Out Flow Limit    Learned Full Table State
                          Flows      Flows      Drops      Flows      Drops         
-------------------- ---------- ---------- ---------- ---------- ---------- -----
g1                            1          0          0          1          0 A    
-----------------------------------------------------------------------------------
> in field indicates value exceeds column width. Use 'wide' option or '0' to clear.
State: A-Active, R-Ready, NR-Not Ready

History

This command was first available in ExtremeXOS 32.2.

Platform Availability

This command is available on ExtremeSwitching 5420, 5520, and 5720 series switches.