You must supply the following hardware for safety cable installation:
A 3 mm (0.12 in.) diameter security cable
A lock to secure the ends of the security cable
About this task
You can secure the access point to the mounting environment using a 3 mm (0.12 in.) diameter safety cable. Use the safety cable to enhance the physical security of the access point after installation.
The following diagram shows the safety hanger hole.
Safety Hanger
Table 1. Safety Hanger
Callout
Description
1
Security hole.
Procedure
Insert the safety cable through the security cable hole on the metal base of the access point.
Push the cable through the security hole until you see it come out on the other side of the metal base.
Insert a lock through the looped ends of the cable and lock it in place.
