This installation guide for the Extreme Networks AP3060 covers hardware specifications, mounting procedures, network onboarding, and regulatory compliance for a Wi-Fi 7 (802.11be) universal weatherized outdoor access point with internal antennas. The AP3060 features a dual 2x2 radio design supporting three operating modes — Mode 1 (2.4/5 GHz), Mode 2 (5/6 GHz), and Mode 3 (Dual 5 GHz) — along with a dedicated sensor, two IoT radios (Bluetooth 5.2 LE, Thread/Zigbee-ready, IEEE 802.15.4), an internal GPS, and an internal pressure sensor. Standard Power 6 GHz is supported with country-dependent availability. The single ETH0 port supports 100/1G/2.5G Mbps auto-sensing PoE in. Operating temperature range is -40°C to +60°C including solar load. Security features include WPA3, L2-L7 DPI firewall, tri-frequency security, PPSK, and Extreme Fabric Attach support. Installation procedures cover wall mounting using the AH-ACC-BKT-ASM stainless-steel bracket, the KT-147407-02 bracket with optional KT-150173-01 extension arm for ±15-degree tilt, the MBO-ART03 articulating bracket for ±80-degree two-axis tilt, and pole mounting using hose straps or bracket combinations. Grounding and post-installation security procedures are included. Pressure washing guidelines specify PSI limits, nozzle angle, and minimum standoff distance. Pre-installation guidance addresses site survey requirements and DHCP/DNS/NTP prerequisites. Network onboarding is supported using automatic DHCP-based discovery or the ExtremeCloud IQ Mobile Onboarding App.
