Display Static Data I-SID IP Multicast Routes Information

About this task

Perform this procedure to display the static data I-SID IP multicast routes information.

Procedure

  1. In the navigation pane, expand Configuration > Fabric.
  2. Select SPBM.
  3. Select the StaticIsidIpMcastRoutes tab.
  4. Select the desired row and type the value of static data I-SID.

StaticIsidIpMcastRoutes Field Descriptions

Use the data in the following table to use the StaticIsidIpMcastRoutes tab.

Name

Descriptions

IsidType

Indicates the type of static data I-SID.

Group

Indicates the group address of the IP multicast route that contains multicast routing information.

Source

Indicates the IP address where the IP multicast route originated.

VsnIsid

Indicates the Virtual Routing Network (VSN) I-SID.

SourceBeb

Indicates the name of the source Backbone Edge Bridge for IP multicast route.

VrfName

Indicates the VRF name of the interface.

DataIsid

Indicates the static I-SID value for IP multicast route.

Bvlan

Indicates the Backbone VLANs (B-VLANs) for the IP multicast route.

NniInterfaces

Specifies the NNI ports for the IP multicast route.SPBM runs in the core on the ports that connect to the core. These ports are NNI ports. Ports that face a customer VLAN are user-to-network interface (UNI) ports.