Configure an ACE to Filter IPv6 Routed Packets
Configure an ACE to filter IPv6 routed packets only.
Before you begin
The ACL exists.
The ACE exists.
Procedure
- In the navigation pane, expand .
- Select Advanced Filters (ACE/ACLs).
- Select the Ipv6Routed tab.
- Select Insert.
- In the AclId field, type the appropriate ACL ID.
- In the AceId field, type the appropriate ACE ID.
- Select RoutedOnly.
- Select Insert.
Ipv6Routed Field Descriptions
The following table describes values on the Ipv6Routed tab.
|
Name |
Description |
|---|---|
|
AclId |
Specifies the ACL ID. |
|
AceId |
Specifies the ACE ID. |
|
RoutedOnly |
Specifies the match for IPv6 routed packets only. |