Edit Site Basic Configuration

About this task

After a site is created, you can edit the basic configuration settings. To get started:

Procedure

  1. Go to Site.
  2. Select a site from the sites list.
    The system displays the Basic Configuration screen.
  3. Basic configuration settings:
    Field Description
    Site Name Name of the site
    Location Physical location of the city where the site is situated
    Contact Site owner contact information
    Time Zone Drop-down to select the timezone for the site
    Country Country where the site is located
    Address Select the address picker icon to select Allow or Don't Allow on your computer's laptop settings to automatically pick the site location. Alternatively, select the address picker and manually search for the site address
    AD WIPS Wired Mitigation Select this option to enable wired lockdown of wireless device connections upon acknowledgment of a threat.
    AD WIPS Wireless Mitigation Select this option to enable wireless lockdown of wireless device connections upon acknowledgment of a threat.
    VLAN Specify the VLAN (within a range of 1 - 4,094) used for traffic control within this site (RF Domain).
  4. In the Channel List, configure channels used by RF domain member radios. These dedicated channels should be as segregated as possible from one another to avoid interference. If too many radios are utilizing a single channel, consider off-loading radios to non utilized channels to improve RF domain performance.
  5. Site tree configuration settings:
    Field Description
    Country Select the country from the drop-down list
    City Select the city from the drop-down list
    Region Select the region from the drop-down list
    Campus Select the campus from the drop-down list
  6. After you have completed configuring the settings, choose from the following actions:
    1. Select Apply to commit the configured settings.
      Note

      Note

      This does not save the settings you configured; it provides a preview of your applied settings. To undo the settings you applied, select Revert.
    2. Select Save to commit and save the configured settings.
      Note

      Note

      If you do not select Save, the settings that you configured are not saved when you move away from the configuration window.

9037761-01 Rev AA