Access points can have their radio configurations modified by their management controller, service platform or peer access point. Take care not to modify an access point's configuration using its resident Web UI, CLI or SNMP interfaces when managed by a profile, or risk the access point having a configuration independent from the profile until the profile can be uploaded to the access point again from its managing device.
Configure radio settings for the selected radio.
| Tab | Description |
|---|---|
| Basic | Configure basic radio settings to include channel settings, RF management, client settings, channel adaptability. |
| WLAN | Configure WLAN radio settings to include beacon and guard intervals, probe response rate, DTIM interval, and WLAN BSS mappings. |
| Bridge | Configure Client Bridge settings to include roaming criteria, keep alive settings, authentication type, and channel plans. |
| MCX | Configure mesh network settings to include the number of mesh links, pre-shared key, preferred peer devices, and mesh mappings. |
| Antenna | Configure antenna settings for the device. |
| Aggregation | Configure aggregate-MSDU and Mpdu settings. |
| Scanning | Enable off-channel scanning for the selected radio. |
| Aeroscout | Configure the Aeroscout Real-Time Location System (RTLS) for location-based functionality. |
| Ekahau | Configure the Ekahau Real-Time Location System (RTLS) for location-based functionality. |
| Advanced | Configure preferred HT clients, braodcast/multicast transmit rate and forwarding, fair airtime and sniffer information. |