Configure Device Ports

You can configure port configuration details and settings at the device level. Device level settings always override any port configuration settings that were made in the device template for a network policy. You must first Unlock this page in order to change the device-specific port configuration. You can also return to the original template configuration with the Revert option.

Note

Only the options available to the specific switch are displayed. For details about each option, see Configure Ports in Bulk.
For 5520/5720 Universal Switches, VIM and partition mode are configurable at the device level.
LLDP/CDP, MAC locking, and STP Priority, Forwarding Delay, and Max Age are configurable at the device level.

Go to Manage > Devices.
Select a device Host Name to see a details panel for that device.
Select the Configuration tab.
Select Port Configuration.
Select Unlock to enable device-level configuration changes.
Select Port Details, and edit any field that is not selectable.
Select Port Settings, and edit any field that is not selectable.
Select STP, and edit any field that is not selectable.
Select Storm Control, and edit any field that is not selectable.
Select PSE, and edit any field that is not selectable.
Select Save Configuration.
To revert back to the network policy:
1. From the Devices list, select the check box for this device.
2. From the Actions drop-down menu, use the Revert Device Template to Device Defaults option.