efa fabric device add
Adds a device to an existing
fabric.
Syntax
efa fabric device add
[
--name
fabric-name
|--ip
device-ip
--role
leaf | spine | super-spine | border-leaf|
--leaf-type
single-homed | multi-homed
|--hostname
hostname
|--asn
local-asn
|--vtep-loopback
id
|--loopback
port-num
|--pod
name|--username
username|--password
password
|
--rack
name|
--help
]
Parameters
- --name
fabric-name
- Specifies the name of the fabric.
- --ip
device-ip
- Specifies the pair of device IP addresses
for rack, or a single IP address for non-rack.
- --role
leaf | spine | super-spine | border-leaf
- Specifies the device role (leaf | spine |
super-spine | border-leaf).
- --leaf-type
single-homed | multi-homed
- Specifies whether the leaf is single-homed
or multi-homed.
- --hostname
hostname
- Specifies the host name.
- --asn
local-asn
- Specifies the local ASN.
- --vtep-loopback
id
- Specifies the VTEP loopback ID.
- --loopback
port-num
- Specifies the loopback port number.
- --pod
name
- Specifies the name of the pod.
- --rack
name
- Specifies the name of the rack.
- --username
username
- Specifies the user name for the device.
- --password
password
- Specifies the password for the device.
Usage Guidelines
A device must be registered with Inventory Service before being added to a fabric.
The Fabric Service supports IP numbered configuration. Each interface on a link
between leaf and spine is assigned an IP address. eBGP peering use these IP
addresses.
Device credentials must be provided as part of this command if the devices are not
already registered with the inventory.
If you provide the user name and password, then the device is automatically
registered with the inventory service.
If you do not provide the user name and password, then you must explicitly register
the device with the inventory service.
Examples
This example adds a pair of devices to the
specified fabric and the specified
rack.
efa fabric device add --name extr-fabric --ip 10.24.80.134,10.24.80.135
--rack room1-rack1 --username admin --password password
