efa inventory device firmware-download execute

Clears out the prepared list for successfully completed devices. Any failed devices will remain in the prepared list to allow for the execution to be retried.

Parameters

--fabric fabric-name

Specifies the name of the fabric.

--noAutoCommit

Configures auto commit in firmware download. By default, the firmware download process auto-commits the firmware following successful completion. Only if you add the noAutoCommit flag, must you manually execute a new efa inventory device firmware-download commit command to commit the downloaded firmware on the SLX device.

--noMaintMode

You can use the noMaintMode flag to ignore Maintainance Mode operations during firmware download. The flag defaults to FALSE, which means Maintainance Mode is enabled and disabled during Firmware Download. If you add the noMaintMode flag, no Maintenance mode operations are performed during the firmware download process.

The following table describes situations in which the noMaintMode flag works in conjunction with configuration of MaintModeOnReboot on the switch.

MaintModeOnReboot	NoMaintMode(FWDL)	DRC Behavior
True	True	DRC is triggered after reboot.
True	False	DRC is triggered.
False	True	No DRC is triggered.
False	False	DRC is triggered.

--help

Displays help for the command.

Usage Guidelines

General warning for traffic loss for single-homed servers if any leaf devices or non-Clos devices are prepared for firmware-download.

One or more devices are prepared.

Run only one instance of this command per fabric.

Example

efa inventory device firmware-download execute --noAutoCommit --fabric fabric 
Firmware Download Execute [success] 
Monitor firmware download execution progress using: 

efa inventory device firmware-download show --fabric fabric 

Please don't execute other commands on these devices until firmware download is in progress 

Firmware download execution initiated with '--noAutoCommit' flag, please commit/restore after completion using: 

efa inventory device firmware-download commit --fabric fabric 
efa inventory device firmware-download restore --fabric fabric 

--- Time Elapsed: 126.85805ms --- 

Example

efa inventory device firmware-download show --fabric fabric 
+-------------+-----------+-------+--------------+-----+------+--------------------------------+--------------------------------+--------------+------------------------+-------------------------------+ 
| IP Address  | Host Name | Model | Chassis Name | ASN | Role | Current Firmware               | Target Firmware                | Update State | Status                 | Last Update Time              | 
+-------------+-----------+-------+--------------+-----+------+--------------------------------+--------------------------------+--------------+------------------------+-------------------------------+ 
| 10.20.246.5 | NHF-Leaf1 | 3009  | SLX9150-48Y  | 0   | Leaf | 20.2.2slxos20.2.2b_201208_0600 |                                | Not Prepared |                        |                               | 
+-------------+-----------+-------+--------------+-----+------+--------------------------------+--------------------------------+--------------+------------------------+-------------------------------+ 
| 10.20.246.6 | NHF-Leaf2 | 3009  | SLX9150-48Y  | 0   | Leaf | 20.2.2slxos20.2.2b_201211_1800 | 20.2.2slxos20.2.2b_201211_1800 | Completed    | Firmware Not Committed | 2020-12-11 19:54:25 -0800 PST | 
+-------------+-----------+-------+--------------+-----+------+--------------------------------+--------------------------------+--------------+------------------------+-------------------------------+ 

Firmware Download Show Details 

Firmware Download Show Overall Status [Completed] 

If Firmware download execution initiated with '--noAutoCommit' flag, please commit/restore after completion using: 

efa inventory device firmware-download commit --fabric fabric 

efa inventory device firmware-download restore --fabric fabric  

--- Time Elapsed: 176.290954ms --- 

Example

efa inventory device firmware-download execute --fabric fabric1 --noMaintMode
Firmware Download Execute [success]
Monitor firmware download execution progress using:
efa inventory device firmware-download show --fabric fabric1 

Please don't execute other commands on these devices until firmware download is in progress 

--- Time Elapsed: 137.250437ms ---