To see general BGP neighbor information, including EVPN parameters, use the following command:
show bgp {neighbor} remoteaddr {address-family [ipv4-unicast | ipv4-multicast |ipv6-unicast | ipv6-multicast | ipv4-vxlan | {l2vpn-evpn [inclusive-multicast | mac-ip | auto-discovery | esi | ip-prefix]}]} [accepted-routes | received-routes | rejected-routes | transmitted-routes] {detail} [all | as-path path-expression | community [no-advertise | no-export | no-export-subconfed | number community_number | autonomous-system-id : bgp-community] | network [any/netMaskLen | networkPrefixFilter] {exact}]
To see BGP route information, use the following command using the l2vpn-evpn option:
show bgp routes {address-family [ipv4-unicast | ipv4-multicast |ipv6-unicast | ipv6-multicast | ipv4-vxlan | {l2vpn-evpn [inclusive-multicast | mac-ip | auto-discovery | esi | ip-prefix]}]} {detail} [ipv4-vxlan | all | as-path path-expression | community [no-advertise | no-export | no-export-subconfed | number community_number | autonomous-system-idbgp-community] | network [any/netMaskLen | networkPrefixFilter] {exact}] {vr vr_name}
To show information about the EVPN instance table, use the following command:
show bgp evpn evi {evi-index evi_index} {vni vni}
To show the current set of MAC addresses configured in EVPN, use the following command:
show bgp evpn mac {mac-address mac_address}
To show the IPv4 entries from the EVPN MAC/IP table, use the following command:
show bgp evpn ipv4 {evi-index evi_index} {ip-address ip_address}
To show the IPv6 entries from the EVPN MAC/IP table, use the following command:
show bgp evpn ipv6 {evi-index evi_index} {ip-address ip_address}
To show the L3 VNI entries from the EVPN MAC/IP table, use the following command:
show bgp evpn l3vni {vr vr_name}}