configure network-clock ptp delete unicast-master

configure network-clock ptp [boundary | ordinary] delete unicast-master ipv4_address [{vlan} vlan_name]

Description

Delete an entry from the unicast master table for a PTP clock instance. This command is available only for boundary clocks.

boundary	Boundary clock.
ordinary	Ordinary clock.
ipv4_address	IPv4 address of a master to the local clock.
vlan_name	VLAN (Virtual LAN) name to which the command is to be applied.

N/A.

Use this command to delete an entry from the unicast master table for a PTP clock instance. This command is available only for boundary clocks.

The following command removes a static unicast master entry from boundary clock:

configure network-clock ptp boundary delete unicast-master 192.168.1.1 vlan lpbk-gm

The following command removes a static unicast master entry from ordinary clock:

configure network-clock ptp ordinary delete unicast-master 192.168.15.10 vlan lpbk-master

This command was first available in ExtremeXOS 15.1 Revision 2.

This command is available on Summit X670-G2, and X460-G2 series switches.

Note

PTP commands can be used only with the Network Timing feature pack.

Published May 2019prev | next