show access-list dynamic counter

show access-list dynamic counter {{countername} any | {countername} ports port_list | {countername} vlan vlan_name} {ingress | egress}

Description

Displays the dynamic ACL (Access Control List) counters.

countername	Display the counter.
any	Specifies the wildcard ACL.
port_list	Specifies which ports‘ ACLs to display.
vlan_name	Specifies which VLAN (Virtual LAN)‘s ACL to display.
ingress	Display ingress ACLs.
egress	Display egress ACLs.

The default is to display all interfaces, ingress.

None.

The following command displays all the dynamic ACL counters:

show access-list dynamic counter

This command was first available in ExtremeXOS 11.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, and ExtremeSwitching X440-G2, X465, X590, X620, X690, X870 series switches.

Published May 2019prev | next