Displays the contents of an L2PT profile.
| profile | Displays profile that defines L2PT configuration for L2 protocols. |
| profile_name | Displays only the specified profile. |
Disabled.
Use this command to display the contents of an L2PT profile.
The following is an example of the command's output:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB# show l2pt profile
Profile Name Protocol Filter Name Action CoS
----------------------------- -------------------------------- ------ ---
my_l2pt_access_prof my_list tunnel 1
my_other_list tunnel 7
my_l2pt_network_prof mylist encap
my_other_list encap
my_none_list none
# show l2pt profile my_l2pt_access_prof
Profile Name Protocol Filter Name Action CoS
----------------------------- -------------------------------- ------ ---
my_l2pt_access_prof my_list tunnel 1
my_other_list tunnel 7
This command was first available in ExtremeXOS 15.5.
This command is available on the Summit X450-G2, X460-G2, X670-G2, and ExtremeSwitching X440-G2, X465, X590, X620, X690, X870 series switches.