Shows the status of VPEX mode, auto-configuration status, Zero Touch Provisioning status, and if applicable, switch port to bridge port extender (BPE) slot assignments.
This command has no arguments or variables.
N/A.
The following example shows VPEX mode and auto-configuration are enabled, and that switch port 1:20 is attached to a BPE assigned to slot number 100:
# show vpex Virtual Port Extender: Enabled Auto-Configuration: Enabled Zero Touch Provisioning: Searching for BPEs Cascade Port/MLAG Id Slot ==================== 1:20 100
The following example shows that VPEX mode is disabled:
# show vpex Virtual Port Extender: Disabled Zero Touch Provisioning: Complete
This command was first available in ExtremeXOS 22.5.
Auto-configuration status information was added in ExtremeXOS 22.6.
Zero Touch Provisioning status (automatic configuration) information was added in ExtremeXOS 30.2.
This command is available on the Summit X670-G2 and ExtremeSwitching X465, X690, X590 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB