show virtual-network remote-endpoint vxlan

show virtual-network {vn_name} remote-endpoint vxlan {vni vni} {ipaddress ipaddress {vr vr_name}}

Description

Use this command to show the remote-endpoints that have been created.

Syntax Description

vn_name Display remote endpoints only for the specified Virtual Network string.
vni A unique 24-bit Virtual Network Identifier that is used in the VXLAN header to encapsulate tenant frames.
vni Virtual Network Identifier value between 1 and 16777215.
ipaddress IP address of the remote endpoint.
ipaddress A remote endpoint IP address

Default

N/A.

Usage Guidelines

When no VXLAN name or VNI is specified a summary output of all remote endpoints appears. You need to supply the virtual network name or VXLAN VNI to query the remote endpoints associated to a specific virtual network. To display detailed information about a specific remote-endpoint, use the ipaddress option.

Example

# show virtual-network remote-endpoint vxlan
IP Address Virtual Router Next Hops Virtual Active/Total Networks
===================================================================
200.1.1.1 VR-Default 2/2 2
200.1.1.2 VR-Default 2/2 1
200.1.1.3 VR-Default 2/2 1
200.1.1.4 VR-Default 2/2 1
200.200.200.200 VR-Default 0/0 0
===================================================================
Total number of Remote Endpoints : 5

# show virtual-network vxlan 
remote-endpoint ipaddress 3.3.3.3

IP Address        : 3.3.3.3                VRF : VR-Default
Learning          : Enabled                Stats Monitor : On
Health Check      : None

                      == Next Hop Information ==
  Gateway       : 22.0.0.1                 MAC  : 00:04:96:97:f8:a6
  Interface     : trunk2                   Port : 1:41
                      == End Next Hop Information ==

                       == Virtual Network Associations ==
  Virtual Network : vni1                   VNI : 1
  Origin          : OSPF Learned,

  Virtual Network : vni2                   VNI : 2
  Origin          : OSPF Learned,
                     == End Virtual Network Associations ==
# show virtual-network remote-endpoint vxlan ipaddress 100.1.1.1

IP Address        : 100.1.1.1                             VRF : VR-Default
Admin State       : Enabled
Learning          : Enabled                     Stats Monitor : Off

                           == Next Hop Information ==
    Gateway       : 50.50.50.1                           MAC  : 00:04:96:9a:92:b7
    Interface     : s1                                   Port : 1:45
                         == End Next Hop Information ==

                       == Virtual Network Associations ==
  Virtual Network : vn1                                   VNI : 1
  Origin          : OSPF Learned,
                     == End Virtual Network Associations ==

History

This command was first available in ExtremeXOS 21.1.

Information about the remote endpoint's administrative state was added in ExtremeXOS 22.4.

Platform Availability

This command is supported on the ExtremeSwitching X670-G2, X465, X590, X690, X695, X870, 5420 , 5520 series switches, and stacks with X465, X590, X670-G2, X690, X695, X870, 5420, 5520 slots only.