configure stpd trap new-root

configure stpd stpd_name trap new-root [on | off]

Description

Enables and disables the new-root trap.

Syntax Description

stpd_name Specifies an STPD name on the switch.
on Enables the new-root trap.
off Disables the new-root trap.

Default

By default, the trap is enabled (on).

Usage Guidelines

The new-root trap is sent when the new root bridge is elected.

Example

The following example disables the new-root trap for the STP domain r1.

configure stpd r1 trap new-root off

History

This command was first available in ExtremeXOS 15.7.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5420, and 5520 series switches.