configure network-clock ptp end-to-end transparent

configure network-clock ptp end-to-end-transparent [add | delete] ports port_list {one-step}

Description

Adds or deletes the physical port(s) to or from the end-to-end-transparent clock.

Syntax Description

add

Add ports.

delete

Delete ports.

ports

Physical ports.

port_list

List of ports to be added or deleted.

one-step

One step operation.

Default

N/A.

Usage Guidelines

Use this command to add or delete the physical port(s) to, or from, the end-to-end-transparent clock. The fiber only 1G ports, 10G ports, and stack ports cannot be added to the End-to-End transparent clock.

Example

The following example configures end-to-end transparent clock on the front panel ports:

# configure network-clock ptp end-to-end-transparent add ports 1-4 one-step

The following example deletes the front panel ports from the end-to-end transparent clock:

# configure network-clock ptp end-to-end-transparent delete ports 2-4

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on ExtremeSwitching X670-G2, and X460-G2 series switches.

Note

Note

PTP commands can be used only with the Network Timing feature pack.