show ports vlan statistics

show ports {port_list} vlan statistics {no-refresh | refresh}

Description

Displays VLAN statistics at the port level.

Syntax Description

port_list Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form: 1, 2, 3-5, 1:*, 1:5, 1:6-1:8.
no-refresh Specifies that there is no continuous refresh. The prompt comes back to the user after fetching statistics once.
refresh Continuous refresh of output.

Default

N/A.

Usage Guidelines

This command is used in conjunction with the configure ports [port_list|all] monitor vlanvlan_name {rx-only | tx-only} command.

Example

The following command displays statistics for the ports 1-2 on node 5:

show ports 5:1-2 vlan stats
Displays the vlan statistics in a real time countinous refresh mode or no-refresh mode.
# show ports 5:1-2 vlan stat
Port VLAN Statistics                                  Wed Mar 28 10:52:59 2007
Port    Vlan      Rx Frames          Rx Byte         Tx Frame        Tx Byte
Count          Count            Count          Count
================================================================================
5:1      Default  318750522     20400046784        318750588      20400051672
5:2      Default  292811491     18739948736        292811975      18739980504
0->Clear Counters  U->page up  D->page down ESC->exit

For ports that do not support transmit statistics, a '-' will be displayed. For ports that do not support transmit byte counters, a '-' will be displayed for that row and column. Similarly, configuration using rx-only or tx-only will result in the display of “-”'s in the appropriate rows and columns.

History

This command was first available in ExtremeXOS 12.0.

The refresh keyword was added in ExtremeXOS 16.1.

Platform Availability

This command is available on the ExtremeSwitching X450-G2, X460-G2, X670-G2, X440- G2, X465, X590, X620, X690, , X695, X870, 5420, 5520 series switches.