show automation edge devices

show automation edge devices {vni vni}

Description

Displays network devices information for an Automation Edge remote VXLAN network identifier (VNI)-device database.

Syntax Description

automation Displays Automation Edge VXLAN VNI-device database information.
edge Specifies Automation Edge.
devices Specifies network devices information, such as switches or APs.
vni A unique 24-bit Virtual Network Identifier";%
vni Virtual Network Identifier value between 1 and 16777215";

Default

N/A.

Usage Guidelines

This command shows the details about the network devices, including device identifier, IP address of the device, MAC address of the device, and the device type (access point or switch).

Example

The following example shows network devices information:

# show automation edge devices
VNI   Device Name              Serial Number            IP Address      Type
----- ------------------------ ------------------------ --------------- ------
30    APName1                  1111222233334444_110     200.200.200.10  AP
31    APName2                  1111222233334444_11      200.200.200.1   AP

The following example shows network devices information for VNI "100":

# show automation edge devices vni 100
Device Name              Serial Number            IP Address      Type
------------------------ ------------------------ --------------- ------
APName1                  1111222233334444_15      200.200.200.5   AP
APName2                  1111222233334444_17      200.200.200.7   

History

This command was first available in ExtremeXOS 31.1 as a demonstration feature.

This command is fully supported in ExtremeXOS 31.2.

Platform Availability

This command is available on ExtremeSwitching X465, X590, X670-G2, X690, X695, X870, 5520 series switches.