Configure the Switch for Use

To perform the initial login and complete the initial configuration tasks, follow these steps from the management console.

1. Connect to the ISW-Series Ethernet port (RJ45 Ethernet port) using factory default IP: 192.0.2.1.
2. Log in with default account and password (admin / [none]
3. Change the IP address with the following commands listed:
   

   enable
   configure terminal
   interface vlan 1
   ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
   exit

4. To log in to the web interface, enter your switch's IP address in a web browser.
5. Enter the account name and password.
6. Click Sign in.