Connecting the Ethernet Interface (RJ45 Ethernet)

ISW provides two types of electrical (RJ45) and optical (mini-GBIC) interfaces.

• To connect to a PC, use a straight-through or a cross-over Ethernet cable.
• To connect the ISW copper port to an Ethernet device, use UTP (Unshielded Twisted Pair) or STP (Shielded Twisted Pair) Ethernet cables.

The pin assignment of RJ45 connector is shown in RJ45 Connector Pins and RJ45 Connector Pin Assignment

RJ45 Connector Pins

RJ45 Connector Pin Assignment

Pin	Assignment	PoE Assignment
1, 2	T/Rx+, T/Rx-	Positive VPort
3, 6	T/Rx+, T/Rx-	Negative VPort
4, 5	T/Rx+, T/Rx-	X
7, 8	T/Rx+, T/Rx-	X