Connecting & Logging in to the Switch

1. Connect to ISW Ethernet port (RJ45 Ethernet port) using factory default IP: 192.0.2.1.
2. Log in with default account and password (admin / [none])
3. Change the IP with commands listed below:
   

   enable
   configure terminal
   interface vlan 1
   ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
   exit

4. To log in to the web interface, enter your switch's IP address in a web browser.
   Refer to Web Browser Support to ensure your browser is supported.
5. Enter the account name and password.
6. Click Sign in.