show interface management

Displays the details of management interface and the IP address configured on the interface.

Syntax

show interface management interface-number

Parameters

management interface-number: Specifies the management interface number.

Modes

Exec mode

Usage Guidelines

This command is available only to users with admin role.

Examples

The following example shows the details of the specified management interface.

device# show interface management 0 
 management 0 Admin state UP      Operational state UP       
 MTU 1514 bytes  
 Hardware is Ethernet  mac address d8:84:66:f9:3c:03 
 Current Speed  1G 
 DHCPv4 Disabled 
 IPv4 address 192.168.122.160/24 
 IPv4 gateway 192.168.122.1 
 DHCPv6 Disabled 
 IPv6 address 2001::100/120 
 IPv6 gateway 2001::1 
Statistics 
 Carrier Transitions: 0 
Input: 
              Total pkts: 424129 
          Broadcast pkts: 22621 
            Discard pkts: 0 
             Errors pkts: 0 
              CRC Errors: 0 
              MCast pkts: 248183 
                  Octets: 227726675 
Out: 
              Total pkts: 45587 
          Broadcast pkts: 2858 
            Discard pkts: 0 
             Errors pkts: 0 
              MCast pkts: 247 
                  Octets: 3974088 
Rate Info: 
                   Input: 0.017180 Mbits/sec, 17 pkts/sec 0.00% of line-rate 
                  Output: 0.007562 Mbits/sec, 5 pkts/sec 0.00% of line-rate