show counters egress-group

Displays the egress group counters for the specified egress group.

Syntax

show counters egress-group {name | all }

Parameters

name
Specifies show counters for the the named egress group.
The egress-group-name supports 1-32 characters. Characters allowed are alpha-numeric, underscore, and dot. Underscore is not allowed as the first character.
all
Specifies show counters for all configured egress groups.

Modes

Exec mode

Usage Guidelines

Valid egress group name must be provided.

Examples

The following example shows egress group counters information.

device# show counters egress-group eg1 
Egress-group Packet Statistics : eg_01     

   TX Frames : 500000000 
    TX Bytes : 260000000000

Egress-group Packet Statistics : eg_02     

   TX Frames : 500000000 
    TX Bytes : 260000000000