match ipv6 access-list

Configures or deletes IPv6 ACL match criteria assigned to a route-map or listener-policy instance.

Syntax

match ipv6 access-list aclname
no match ipv6 access-list aclname

Parameters

aclname
Specifies the name of the IPv6 ACL to be matched and assigned to the current route map.

Modes

Route-map config mode

Listener-policy config mode

Usage Guidelines

If match criteria succeed, the next action is decided by the permit | deny clause of route map:
  • If permitted, packet-forwarding behavior is based on the match and set actions.
  • If denied, packets are dropped.

If match criteria fail, this command is not applied and packets are evaluated by other route-map clauses.

Examples

The following example configures the IPv6 ACL named ipv6-1 to be matched for the current route map.

device(conf-route-map)# match ip access-list ipv6-1

The following example deletes the IPv6 ACL named ipv6-1 from the current route map.

conf-route-map#
(conf-route-map)# no match ip access-list ipv6-1
9037168-00 Rev AA