Installing Your Device

Before you attempt to install or remove an Extreme Networks switch or router, read the precautions in Safety Considerations for Installing Switches.

Extreme Networks switch routers fit into standard 19-inch equipment racks.

A four-post rack-mounting kit is provided with the device. A two-post kit can be ordered separately.

The installation process includes the following tasks:

  1. Prepare to install the device.
    See What You Will Need for the Installation.
  2. Install the device in the rack.
    See Attaching the Switch to a Rack.
  3. Install optional components: optical transceivers and cables.
    See the instructions in Installing Optional Components.
  4. If your device does not come with an installed internal power supply, install one or two power supplies.
    See Installing Internal Power Supplies.
    Note

    Note

    Be aware of whether the power supply you are installing is AC-powered or a DC-powered. The installation instructions are different depending upon what type of power is used.
  5. Power up the device.
    See Powering up the Device.
  6. Connect network interface cables.
    See Connecting Network Interface Cables.
  7. Perform initial network connection and configuration.
    See Establishing a serial connection and Configuring the Switch for Use.
9036696-01 Rev AH