show ip pim interface

Displays information for PIM interfaces.

Syntax

show ip pim interface [ vrf vrf-name ]

show ip pim interface { ethernet slot/port-id | loopback loopback-number | ve vlan ID } [ vrf vrf-name ]

Parameters

vrf vrf-name: Specifies a VRF.
ethernet slot/port-id: Specifies a physical interface. For devices without linecards, specify 0 for the slot.
loopback loopback-number: Specifies a loopback interface.
ve vlan ID: Specifies a virtual interface.

Modes

Privileged EXEC mode

Examples

The following example displays unfiltered show ip pim interface output.

device# show ip pim interface
-------------+---------------+----+-----+------------------------------+---+------
Interface |Local   |Ver|Mode | Designated Router |TTL| DR
          |Address |   |    |Address      Port   |Thr| Prio
-------------+---------------+---------------------------------------+---+------
Eth 2/30  55.1.1.1  v2   SM  Itself                1    1
Ve30      30.1.1.1  v2   SM  30.1.1.20    Ve30     1    1
Lo        1 4.4.4.4 v2   SM  Itself 1 1