Displays detailed Bidirectional Forwarding Detection (BFD) neighbor information.
Privileged EXEC mode
The show bfd neighbors details command displays the following information:
| Output field | Description |
|---|---|
|
OurAddr |
Specifies the source IP address of the interface on which this BFD session is running. |
|
NeighAddr |
Specifies the IPv4 address of the remote neighbor. |
|
State |
Specifies the current state of the BFD session:
|
|
Int |
Specifies the interface on which the BFD session is running. |
|
Local: |
|
|
State |
State of the local device. |
|
Diag |
Value of the diagnostic field in the BFD control message as used by the device in the last message sent. |
|
Demand mode |
Value of the demand in the BFD control message as used by the device in the last message received. |
|
Poll |
Value of the poll in the BFD control message as used by the device in the last message sent or received. |
|
Received |
|
|
State |
State of the remote device. |
|
Diag |
Value of the diagnostic field in the BFD control message as used by the device in the last message received. |
|
Demand mode |
Value of the demand in the BFD control message as used by the device in the last message received. |
|
Poll |
Value of the poll in the BFD control message as used by the device in the last message received. |
|
Final |
Value of the final bit in the BFD control message as used by the device in the last message received. |
|
Local |
The local device |
|
MinTxInt(ms) |
The interval in milliseconds between which the device will send a BFD message from this local neighbor port to its peer. |
|
MinRxIntMinTxInt(ms) |
The interval in milliseconds that the neighbor device waits to receive a BFD message from its peer on this local port. |
|
Multiplier |
The number of times that the neighbor device will wait for the MinRxInterval time on this port before it determines that its peer device is nonoperational. |
|
Received |
|
|
MinTxInt(ms) |
The interval in milliseconds between which the device will send a BFD message from the remote neighbor port to its peer. |
|
MinRxIntMinTxInt(ms) |
The interval in milliseconds that the neighbor device waits to receive a BFD message from its peer on this remote port. |
|
Multiplier |
The number of times that the remote neighbor device will wait for the MinRxInterval time on this port before it determines that its peer device is nonoperational. |
|
Rx Count |
Total number of BFD control messages received from the remote peer. |
|
Tx Count |
Total number of BFD control messages sent to the remote peer. |
|
LD/RD |
Local and remote descriptor |
|
Heard from Remote |
Indicates remote BFD neighbor has been heard. |
|
Current Registered Protocols |
Specifies the protocols that are registered for the particular session. |
|
Uptime |
The amount of time the BFD session has been in the up state. |