scheduler
Configures the strict priority queues on an interface for QoS egress scheduling.
Syntax
scheduler strict-priority
traffic-class-queues
dwrr
TC0-BW%
TC1-BW%
TC2-BW%
TC3-BW%
TC4-BW%
TC5-BW%
TC6-BW%
TC7-BW%
no scheduler strict-priority
Parameters
- traffic-class-queues
- Specifies the traffic class strict priority queues. Enter one of the following integers:
- 0—No strict priority queues
- 1—Traffic class 7 strict priority queue
- 2—Traffic class 6 through 7 strict priority queues
- 3—Traffic class 5 through 7 strict priority queues
- 4—Traffic class 4 through 7 strict priority queues
- 5—Traffic class 3 through 7 strict priority queues
- 6—Traffic class 2 through 7 strict priority queues
- 7—Traffic class 1 through 7 strict priority queues
- drww
TC0-BW%
TC1-BW%
TC2-BW%
TC3-BW%
TC4-BW%
TC5-BW%
TC6-BW%
TC7-BW%
- Configures the Deficit Weighted Round Robin queues in percentage for each traffic class, if the priority is in weighted fair queue (WFQ) mode. Enter an integer from 0 through 100 (TC0-BW for traffic class 0 through
TC7-BW for traffic class 7). The total of all values must equal 100%.
Modes
Policy-map configuration mode
Usage Guidelines
This command is allowed only for the egress direction.
Use the
no form of this command to remove QoS egress scheduling from the interface.
Examples
The following example configures QoS egress scheduling on an interface.
device# configure terminal
device(config)# policy-map policy_1
device(config-policymap)# class default
device(config-policymap-class)# scheduler strict-priority 1 dwrr 25 25 25 10 5 5 5
