show ip ospf area
Displays the OSPF area table in a specified format.
Syntax
show ip ospf area
{
A.B.C.D
|
decimal
}
database
link-state
[
adv-router
router-id
|
advertise
index
|
asbr
{
asbr-id
|
adv-router
router-id
}
|
extensive
|
link-state-id
id
|
network
{
net-id
|
adv-router
router-id
}
|
nssa
{
nssa-id
|
adv-router
router-id
}
|
router
{
router-id
|
adv-router
router-id
}
|
self-originate
|
sequence-number
num
|
summary
{
id
|
adv-router
router-id
}
]
[
vrf
vrfname
]
show ip ospf area
[
vrf
vrfname
]
Parameters
-
A.B.C.D
- Area address in dotted decimal format.
-
decimal
- Area address in decimal format. Valid values range from 0 to 2147483647.
-
database
link-state
- Displays database link-state information.
- adv-router
router-id
- Displays the link state for the advertising router that you specify.
-
advertise
index
- Displays the link state by Link State Advertisement (LSA) index.
-
asbr
- Displays the link state for all autonomous system boundary router (ASBR) links.
- asbr-id
- Displays the state of a single ASBR link that you specify.
-
extensive
- Displays detailed information for all entries in the OSPF database.
-
link-state-id
id
- Displays the link state by link-state ID.
-
network
- Displays the link state by network link.
- net-id
- Displays the link state of a particular network link that you specify.
-
nssa
- Displays the link state by not-so-stubby area (NSSA).
- nssa-id
- Displays the link state of a particular NSAA area that you specify.
-
router
- Displays the link state by router link.
- router-id
- Displays the link state of a particular router link that you specify.
-
self-originate
- Displays self-originated link states.
-
sequence-number
num
- Displays the link-state by sequence number that you specify.
-
summary
- Displays the link state summary. Can specify link-state ID or advertising router ID.
- id
- Displays the link state for the advertising router that you specify.
-
vrf
vrf
name
- Specifies the name of the VRF instance. If this option is not used, details for the default VRF are shown in the output.
Modes
Privileged EXEC mode
Examples
The following example shows output for the
show ip ospf area command.
device# show ip ospf area
Number of Areas is 1
Index Area Type Cost SPFR ABR ASBR LSA Chksum(Hex)
1 0 normal 0 4305 0 0 5 00024f5a
