Resetting Normal LSPs

The clear mpls lsp command allows the user to reset normal LSPs.

About this task

The user has the option of supplying the primary or secondary parameter for a normal LSP to reset only the primary or secondary path of the LSP.

To reset or clear a bypass RSVP LSP session complete the following steps.

Enable the device for configuration.
```
device# configure
```
Enable the MPLS router.
```
device(config)# router mpls
```
Tear down then bring up the bypass LSP.
```
device(config-router-mpls)# clear mpls bypass-lsp test1
```
In this example, the name of the LSP is test1.

the following example clears the bypass RSVP LSP session for LSP test1.

device# configure 
device(config)# router mpls
device(config-router-mpls)# clear mpls bypass-lsp test1

When the user resets an LSP with the clear mpls lsp command, the following information message displays:

"Disconnecting signaled LSP name"
"Connecting signaled LSP name"