Display IPv6 PIM Information

You can use show commands to display information about the internal state of IPv6 PIM. You can run the commands from any level of the CLI. For more information, see the Extreme SLX-OS Command Reference.
  1. Display the mapping of group addresses to Rendezvous Point (RP) addresses.
    device# show ipv6 pim rp-map
    Number of group-to-RP mappings: 3
    
         Group address       RP address
    ----------------------------------------
    1    ff04:3000:4000::2   1234::1234
    2    ff08:1001:2001::1   1234::5
    3    ff0e:1000:2000::1   1234::32
  2. Display the RPs for a PIM-SM (Sparse Mode) group.
    device# show ipv6 pim rp-hash ff0e:1000:2000::1
    RP: 1234::32, v2
        Info source: 1234::5, via bootstrap
  3. Display the list of RPs that the switch has learned.
    device# show ipv6 pim rp-set
    Vrf Instance : default-vrf
    ---------------------------
    Static RP
    ---------
     Static RP count: 1
       RP: 1234::1234
    Number of group prefixes Learnt from BSR: 3
    Group prefix = ff05::      # RPs: 1
          RP 1: 1234::5    priority=0    age=30    holdtime=150
    Group prefix = ff08::      # RPs: 1
          RP 1: 1234::5    priority=0    age=30    holdtime=150
    Group prefix = ff0e::      # RPs: 1
          RP 1: 1234::32   priority=0    age=40    holdtime=150
    
  4. Display the Reverse Path Forwarding (RPF) for an address.
    device# show ipv6 pim rpf 1234:32
    upstream nbr fe80::2e0:cff:fe03:a on Eth 0/8
  5. Display a list of PIM multicast groups.
    device# show ipv6 pim group
    Total number of groups: 3
    1    Group ff04:3000:4000::2
         Group member at  Ve100: Ve100
    2    Group ff08:1001:2001::1
         Group member at  Ve200: Ve200
    3    Group ff0e:1000:2000::1
         Group member at  eth 0/1: eth 0/1
  6. Display information about the bootstrap router (BSR) and the candidate RP.
    device# show ipv6 pim bsr
    PIMv2 Bootstrap information :
    ------------------------------------------------------------------
      This system is the Elected BSR
      BSR address: 1234::5. Hash Mask Length 32. Priority 0.
      Next bootstrap message in 00:00:50
      Configuration:
        Candidate Lo 1 (Address 1234::5). Hash Mask Length 32. Priority 0.
    Next Candidate-RP-advertisment in 00:00:50
      RP: 1234::5
        group prefixes:
        ff08:: / 16
        ff05:: / 16
      Candidate-RP-advertisement period: 60
  7. Display information about the candidate RP and its group mappings.
    device# show ipv6 pim rp-candidate
    Next Candidate-RP-advertisment in 00:00:10
      RP: 1234::5
        group prefixes:
        ff08:: / 16
        ff05:: / 16
      Candidate-RP-advertisement period: 60
  8. Display information about the Anycast RP.
    device# show ipv6 pim anycast-rp
    Number of Anycast RP: 2
    Anycast RP :2003:1::1
    Prefix Name :AnyCastRPList-1
    Peer Addresses :
    2002:1:2::1
    2002:1:5::1
    2002:1:8::1
    Anycast RP :2003:2::1
    Prefix Name :AnyCastRPList-2
    Peer Addresses :
    2001:2:5:25::5
    2001:2:8:28::8
    2001:2:8:28::2
    2001:5:8:58::5
    2001:2:5:25::2
    2001:5:8:58::8
    
  9. Display information about active PIM neighbors.
    device# show ipv6 pim neighbor
    Total Number of Neighbors : 4
    Port         Phy_Port     Neighbor                       Holdtime Age       UpTime         Priority
                                                             sec      sec      Dd HH:MM:SS
    Eth 0/6      Eth 0/6      fe80::da84:66ff:feea:3b1f      105      16          01:32:17         1
                             +2001:6:8:68::6
    Ve20         Ve20         fe80::7aa6:e1ff:fe45:9815      105      19          01:42:21         1
                             +2001:5:8:58::5
    Ve40         Ve40         fe80::748e:f8ff:fe05:7801      105      10       7d 07:10:24         1
                             +2001:2:8:28::2
    Ve41         Ve41         fe80::748e:f8ff:fe05:7801      105      10       7d 07:10:23         1
                             +2001:8:2:82::2
    
  10. Display the IPv6 PIM status and configuration information for an interface.
    device# show ipv6 pim interface
    -------------+------------------------------+----+-----+-------------------------------------------+---+--------|--------------------
    Interface    |Local                         |Ver |Mode |Designated                    Router       |TTL| DR     |        Vrf
                 |Address                       |    |     |Address                       Port         |Thr| Prio   |        Name
    -------------+------------------------------+----+-----+-------------------------------------------+---+--------|--------------------
    Eth 0/6       fe80::629c:9fff:fe5a:ee1c      v2    SM    fe80::da84:66ff:feea:3b1f     None          1   1       default-vrf
    Eth 0/47      fe80::629c:9fff:fe5a:ee45      v2    SM    Itself                        None          1   1       default-vrf
    Ve20          fe80::629c:9fff:fe5a:ee15      v2    SM    fe80::7aa6:e1ff:fe45:9815     None          1   1       default-vrf
    Ve40          fe80::629c:9fff:fe5a:ee15      v2    SM    fe80::748e:f8ff:fe05:7801     None          1   1       default-vrf
    Ve41          fe80::629c:9fff:fe5a:ee15      v2    SM    fe80::748e:f8ff:fe05:7801     None          1   1       default-vrf
    Ve700         fe80::629c:9fff:fe5a:ee15      v2    SM    Itself                        None          1   1       default-vrf
  11. Display route entries in the multicast cache.
    device# show ipv6 pim mcache 			   
    IP Multicast Mcache Table
    Entry Flags    : sm  - Sparse Mode, ssm - Source Specific Multicast
                     RPT - RPT Bit, SPT - SPT Bit, LSrc - Local Source
                     LRcv - Local Receiver, RegProbe - Register In Progress
                     RegSupp - Register Suppression Timer, Reg - Register Complete
                     needRte - Route Required for Src/RP, JDUp - Join Desire Upstream
    Interface Flags: IM - Immediate, IH - Inherited, WA - Won Assert
                     MJ - Membership Join, MI - Membership Include, ME - Membership Exclude
                     BR - Blocked RPT, BA - Blocked Assert, BF - Blocked Filter
                     BI - Blocked IIF, UJ - Unintended Join oif
    Total entries in mcache: 2
    1    (*, ff0e:1000:2000::1) RP 1234::32 in Eth 0/8, Uptime 00:16:18
         Sparse Mode, RPT=1 SPT=0 Reg=0 RegSupp=0 RegProbe=0 JDUp=1 LSrc=0 LRcv=1
         upstream neighbor=fe80::2e0:cff:fe03:a (2008::32)
         AgeSltMsk: 0     num_oifs = 1
               Ve100(00:16:18/0) Flags: MJ
         Flags (0x01260480)
             sm=1 needRte=0
    2    (1010::100, ff0e:1000:2000::1) in Eth 0/8, Uptime 00:09:27
         Sparse Mode, RPT=0 SPT=1 Reg=0 RegSupp=0 RegProbe=0 JDUp=1 LSrc=0 LRcv=1
         upstream neighbor=fe80::2e0:cff:fe03:a (2008::32)
         AgeSltMsk: 1 KAT timer value: 240
         num_oifs = 1
               Ve100(00:09:27/0) Flags: MJ
         Flags (0x510680f4)
             sm=1 needRte=0
  12. Display traffic statistics for IPv6 PIM-enabled interfaces.
    device# show ipv6 pim traffic
    Port        |HELLO              |JOIN               |PRUNE              |ASSERT             |GRAFT/REGISTER     |REGISTER-STOP      |BSR-MSGS           |RPC-MSGS
                |Rx        Tx       |Rx        Tx       |Rx        Tx       |Rx        Tx       |Rx        Tx       |Rx        Tx       |Rx        Tx       |Rx        Tx
    ------------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------
    Eth 0/6      197       201       490       0         0         0         0         0         0         0         0         0         0         0         0         0
    Eth 0/47     0         21087     0         0         0         0         0         0         0         0         0         0         0         0         0         0
    Ve20         219       220       1068      108       0         214       0         0         0         643       428       0         0         0         0         0
    Ve40         21034     21035     18264     64000     57        31535     0         0         73972     41170     61336     36982     0         0         0         0
    Ve41         21032     21037     4         12        16        450       0         14913     4         0         0         0         0         0         0         0
    Ve700        0         21086     0         0         0         0         0         0         0         0         0         0         0         0         0         0
  13. Display settings such as neighbor timeout and hello interval.
    device# show ipv6 pim settings
    vrf : default-vrf
    Maximum mcache           : 32768     Current Count             : 0 
    Hello interval           : 30        Neighbor timeout          : 105 
    Join/Prune interval      : 60        Inactivity interval       : 180
    Hardware drop enabled    : 1         Prune wait interval       : 3 
    Register Suppress Time   : 60        Register Probe Time       : 10 
    Register Stop Delay      : 0         Register Suppress interval: 0 
    SSM Enabled              : No        SPT Threshold             : 1 
    Route Precedence         : uc-non-default uc-default none