Configure Options on an IPv6 PIM Interface

When IPv6 PIM is enabled globally, you can configure several PIM options for the interface.

Note

Note

Perform all Layer 3 configuration for VLANs, bridge domains, and link aggregation groups under their respective Layer 3-level interfaces.

Enter global configuration mode.
```
device# configure terminal
```
Enter device configuration mode.
```
device(config)# interface ve 30
```
Run the following commands as needed.
For more information, including examples, see the Extreme SLX-OS Command Reference.
1. Enable IPv6 PIM on an interface.
```
device(config-if-ve-30)# ipv6 pim-sparse
```
2. Specify the designated router (DR) priority of an IPv6 PIM interface.
```
device(config-if-ve-30)# ipv6 pim dr-priority 100
```
3. Configure the Time to Live (TTL) threshold for an IPv6 PIM interface.
```
device(config-if-ve-30)# ipv6 pim ttl-threshold 64
```

9038040-00 Rev AA