You can run the following commands from any level of the CLI. For more information, see the Extreme SLX-OS Command Reference.
device# show ip igmp groups Total Number of Groups: 2 IGMP Connected Group Membership Group Address Interface Uptime Expires Last Reporter Version 225.1.1.1 vlan25 00:05:27 00:02:32 25.1.1.1202 Member Ports: eth 0/24
device# show ip igmp snooping Vlan ID: 10 Multicast Router ports: eth0/1 Querier - Disabled IGMP Operation mode: IGMPv3 Is Fast-Leave Enabled : Enabled Max Response time = 10 Last Member Query Interval = 1 Query interval = 125 Number of Multicast Groups: 0
device# show ip multicast snooping mcache Flags : V2|V3 : IGMP Receiver, P_G : PIM (*,G) Join, P_SG: PIM (S,G) Join BR : PIM Blocked RPT Vlan ID : 10 ------------- 1 (20.20.20.20, 232.0.0.10 ) 22:37:48 NumOIF: 1 Outgoing Ports: eth0/34 Flags: 0x24 ( V3) 00:00:08/252s
device# show ip igmp statistics vlan 1 IGMP packet statistics for all interfaces in vlan 1: IGMP Message type Edge-Received Edge-Sent Edge-Rx-Errors ISL Received Membership Query 0 0 0 0 V1 Membership Report 0 0 0 0 V2 Membership Report 0 0 0 0 Group Leave 0 0 0 0 V3 Membership Report 0 0 0 0 PIM hello 0 0 0 0 IGMP Error Statistics: Unknown types 0 Bad Length 0 Bad Checksum 0
device# show ip igmp interface Interface Ve100 IGMP enabled IGMP query interval 30 seconds IGMP other-querierinterval 65 seconds IGMP query response time 10 seconds IGMP last-member query interval 1 seconds IGMP immediate-leave disabled IGMP querier100.0.0.1(this system) IGMP version 2
device# show ip igmp snooping mrouter vlan 10 Vlan Interface Expires (Sec) 10 eth0/4 250 10 eth0/1 238
device# show ip igmp ssm-map +------------------------------------+-------------------+ | PrefixList Name | Source Address | +------------------------------------+-------------------+ ssm-map-230-to-232 203.0.0.10 ssm-map-233-to-234 204.0.0.11