To support ACL mirroring, define a destination ACL
mirror port common to all ports of a port processor (PPCR). ACL mirroring is supported for
ethernet, port-channels, and ve ingress interfaces.
-
Enter configure terminal
to access global configuration mode.
device# configure terminal
-
To define a physical interface as the mirror, enter a command such as the following example.
device(config)# acl-mirror source ethernet 0/1 destination ethernet 0/2
-
To define a port-channel as the mirror, enter a command such as the following example.
device(config)# acl-mirror source ethernet 0/1 destination port-channel 1
-
To define a port-channel as the source for the mirror, enter a command such as the following
example.
device(config)# acl-mirror source port-channel 3 destination port-channel 6
