show port-channel load-balance

Displays the load balance configuration information for the system.

Syntax

Modes

Privileged EXEC mode

Usage Guidelines

Use this command to display the load balance configuration on the system.

Examples

The following example displays the output for the load balancing configuration on an Extreme 8820.

SLX # show port-channel load-balance
Header parameters
        Ethernet Mask: smac-dmac etype vlan
        ip: sip-dip protocol
        ipv6: sipv6-dipv6 ipv6-next-hdr
        l4: src-dst-port
        mpls: all-labels

Hash Settings
        normalize:0, rotate:3
SLX #

The following example displays the output for the load balancing configuration on a SLX 9150.

SLX # show port-channel load-balance 
Header parameters
	Ethernet Mask: sa-mac da-mac etype vlan 
	ip: src-ip dst-ip protocol src-l4-port dst-l4-port 
	ipv6: ipv6-src-ip ipv6-dst-ip ipv6-next-hdr ipv6-src-l4-port ipv6-dst-l4-port
 
Hash Settings
	hdr-start:Forwarding, hdr-count:3, include_src_port:0
load-balance-type hash-based 

SLX #

The following example displays the output for the load balancing configuration on a Extreme 8820 device.


SLX # show port-channel load-balance
      Header parameters
              Ethernet Mask: smac-dmac etype vlan
              ip: sip-dip protocol
              ipv6: sipv6-dipv6 ipv6-next-hdr
              l4: src-dst-port
              mpls: all-labels

      Hash Settings
              hdr-start:LastTerminated, normalize:0, rotate:3