The front panel of the 5420F-48P-4XE switch includes:
48 10/100/1000BASE-T full/half duplex (autosensing) MACsec capable ports with Type 2 PoE+ (30W).
Note
Half-duplex is not supported on these ports when operating at 1Gbps.4 1/10Gb SFP+ MACsec capable uplink ports (unpopulated)
2 Stacking/SFP-DD ports (unpopulated)
1 Serial console port (RJ-45)
1 10/100/1000BASE-T out-of-band management port
2 USB Type-A ports for management or external flash
1 USB Micro-B console port
Note
If you are trying to activate a MACsec license on a 5420F-48P-4XE switch with hardware revision AC, contact GTAC for the latest support information.
|
1 = 10/100/1000BASE-T ports |
10/100/1000BASE-T out-of-band management port |
7 = SFP-DD stacking ports |
|
2 = Mode button |
5 = RJ-45 serial console port |
8 = 1/10G SFP+ ports |
|
3 = USB Micro-B console port |
6 = USB Type-A ports |
|
The rear panel of the switch includes:
3 fixed fan modules
Grounding lug
1 AC power inlet connector
1 power supply slot
|
1 = Grounding lug |
3 = AC power inlet connector |
|
2 = Fixed fan modules |
4 = Power supply slot |