The front panel of the 5420M-16MW-32P-4YE switch includes:
16 100Mb/1Gb/2.5Gb MACsec cabable ports with 802.3bt Type 4 PoE (90W)
Note
Half-duplex is not supported on these ports when operating at 1Gbps.32 10/100/1000BASE-T full/half duplex (autosensing) MACsec capable ports with Type 2 PoE+ (30W)
4 1/10/25Gb SFP28 MACsec capable uplink ports (unpopulated)
2 Stacking/SFP-DD ports
Note
These ports can operate either as stacking ports, or as 10G Ethernet ports with SFP+ optics using the disable stacking-support command.1 Serial console port (RJ-45)
1 10/100/1000BASE-T out-of-band management port
2 USB Type-A ports for management or external flash
1 USB Micro-B console port
|
1 = 100Mb/1Gb/2.5Gb ports10/100/1000BASE-T ports |
4 = USB Micro-B console port |
7 = USB Type-A ports |
|
2 = 10/100/1000BASE-T ports |
5 = 10/100/1000BASE-T out-of-band management port |
8 = SFP-DD stacking ports |
|
3 = Mode button |
6 = RJ-45 serial console port |
9 = 1/10/25G SFP28 ports |
The rear panel of the switch includes:
1 fan module
Grounding lug
2 power supply slots
|
1 = Grounding lug |
3 = Power supply slots |
|
2 = Fan module |
|