Access Point and Accessory Box Contents and
Order Information
Access point box contents
When you purchase the access point, ensure that the following items are available in
the box:
An access point you have
ordered (AP460C, or AP460S6C, or AP460S12C) with two installed M20 cable gland assemblies and
plugs, and two installed M25 seal caps
Hardware bag containing
grounding hardware:
M4 ground screw
Split washer
Lock washer
Read Me card
AH-ACC-BKT-ASM accessory bag
contents
Note
All accessory must be purchased separately.
Important
The AP460C, AP460S6C, and AP460S12C use different mounting
accessories than the AP460i/e series access points.
The AH-ACC-BKT-ASM accessory is an outdoor stainless-steel accessory for wall
installations. The bag is labeled 'Wall Mount' and contains the following items:
One AH-ACC-BKT-ASM stainless-steel wall bracket assembly
Four M5 bolts
AH-ACC-STRP-MRN accessory bag
contents
The AH-ACC-STRP-MRN accessory is an outdoor stainless-steel pole cable clamp for 3
in. to 7 in. diameter poles. The accessory bag contains the following item:
One AH-ACC-STRP-MRN
stainless-steel cable clamp
Outdoor PoE
The PD-9001GO-ENT PoE single-port midspan unit is used to power the access point for
outdoor installations.
The PoE unit is fully IEEE 802.3af/802.3at compliant and offers surge and lightning
protection.
Micro USB order
information
You can order a micro USB console adapter for your access point using the part number
ACC-WIFI-MICRO-USB.
